How to connect a tablet to the RPT600

IN this video we review the steps necessary to establish a connection between the tablet and the RPT600. Please note that the RPT600 is our WiFi only connection. This connection is different than the connection to any of our RTS Series guns and their 2.4GHz Radio.

Tripod Setup and RTS Leveling

IN this video we demonstrate some techniques for setting up a tripod, placing a Robotic Total Station on that tripod and leveling the instrument. This demonstration is suitable if you use a robotic total station, a manual total station of a transit. We also point out the reason why we prefer the use of our fiberglass TriMax tripods to the…

Read More→

RTS Digital Bubble Level

In this video we walk you through the process of using the onboard digital level in a Trimble Robotic Total Station. This is our preferred method of leveling your instrument and we walk you through the steps and how to adjust the accuracy of the onboard digital level.

Trimble RTS – Collecting Data in Prism and Laser Mode

Our Trimble Robotic Total Stations allow users to use both a viable and invisible laser to perform layout tasks and collect data. IN this video we introduce the basics of how those two modes work and how the user can change the settings to perform layout and collection tasks using the laser or the more traditional prism and pole to…

Read More→

Trimble Field Link – Control Setup and Resection

The best way to setup and use your Robotic Total Station is to set it up in a good location and then have clear line of sight to perform your layout tasks. Here we cover one of the first steps in completing layout tasks and that is establishing the instrument location on the building site using control points and shooting…

Read More→

Trimble Field Link – Create Menu

Trimble Field Link offers users the ability to create data. This can be creating points to layout on an existing drawing or model. Please note that you can load the following drawing types into Trimble Field Link: DWG, DXF, IFC, SKP, PDF. We also demonstrate how you can create a DWG export by creating line work connecting collected points. We…

Read More→